Deck Equipment for Boats and Yachts
( number of products: 289 )
Borika FASTen Ph206 carry handle with towing ring under the Fs219 lock

Borika FASTen Pr203 double D-ring for mounting under the Fs219 lock

Borika FASTen Pt205 towing ring for mounting under the Fs219 lock

Borika FASTen Kn228 set of T-bolts with knobs for T-track, 2 pcs

Borika FASTen Ap221 adapter with double locking and 27.7° splines

Borika FASTen Ah264 swivel adapter for joining two locks, black and grey

Borika FASTen Dp230 adjusting washers from 27.7° to 7.5°, 6 pcs

Borika FASTen CUPt drink holder with organiser and T-track adapter, black

Borika FASTen THf375 angler’s table with magnets and T-track, 28 × 38 cm

Borika FASTen Rl032 reinforced oarlock and tube clamp, Ø 32 mm, grey

Borika FASTen CUp drink holder with organiser, black and grey

Borika FASTen Oh032-2 oar and tube holder Ø 32-35 mm, grey, 2 pcs

Borika FASTen Oh032-2 oar and tube holder Ø 32-35 mm, black, 2 pcs

Borika FASTen ARr004 reinforced swivel-tilt anchor roller, up to 20 kg, black

Borika FASTen Al003 + FMp225 anchor kit for inflatables, up to 8 kg, grey

Borika FASTen At221 rigging adapter with Ø 6 mm cross hole, black

Borika FASTen HTr213-2 rod holder with FMr132 mount for Ø 30/32 mm tubes

Borika FASTen Rr400 rack for 3 rods with belly boat mounting kit

Borika FASTen Al002 anchor holder with lock, up to 8 kg, grey

Borika FASTen Al003 swivel-tilt anchor holder with lock, up to 8 kg, grey

Borika FASTen Ex325 accessory extension, 305 mm, 27.7° splines

Borika FASTen Ex632 accessory extension, 610 mm, 27.7° splines
Equipment mounted on deck and at the side of the boat: underwater and deck lighting, fenders that protect the hull when mooring, and mooring and anchoring hardware.
Three groups, three different moments
- Boat lighting is a planned purchase, often as part of an upgrade. Hull lights must be installed below the waterline, deck light bars need wiring to be run
- Fenders and hull protection are bought before the first season and replaced when worn. They are the cheapest insurance for paint and gelcoat
- Mooring and anchoring is the hardware that keeps the boat in place, at the dock and at anchor
What to look out for when choosing
A fender is chosen to suit the length of the boat and the freeboard height, not personal taste. Too small and it will not protect in waves; too big and it gets in the way when boarding.
High-power underwater lighting draws a significant current, so it needs circuit protection matched to the cable cross-section. With an extensive lighting installation, it is worth calculating the power budget together with the other loads.
Advice before you buy
If you are equipping a boat from scratch or planning a deck upgrade, write to us with your boat type and what is already installed. We will put together a complete set including wiring and mounting hardware.
Frequently asked questions
What should I buy for the first season with a new boat?
Fenders matched to the length of the boat, mooring lines and mooring hardware. Lighting and deck upgrades can be planned in later stages.
Does underwater lighting suit every boat?
Through-hull lights require a suitable hull thickness and material. Where that is not possible, surface-mount lights from the Underwater lighting category are used.
How many fenders do I need?
As a rule of thumb, one fender for every three metres of boat length on the side you moor. You will find detailed sizing advice in the Fenders and hull protection category.













